Hello Circuit

My first circuit ever

My very first circuit design. Not 100% done but enough to put it on the 'fridge. ;-)

This is a board I want to make that will be used to take a DC power source and share it with a radio, mobilinkd TNC2, and a phone. I think I'll actually add …

more…

APRS Test Setup

You may remember the APRS setup I had in the RV a couple of summers ago. I am looking to do  more mobile\backpack\motorcycle operating and eventually get into Summits On The Air (SOTA) so I'm working on a lighter weight version of my setup and first I'm testing …

more…

Baofeng Battery Eliminator Teardown

I wanted to see what was inside the Baofeng BL-5 Battery Eliminator, so I took it apart. Here are the pictures.

To disassemble, unscrew the tip which hold in the fuse.

To disassemble, unscrew the tip which holds in the fuse.

IMG_20150504_155214

IMG_20150504_155148(2)

IMG_20150504_155101 (2)

IMG_20150504_155232

Notice the three connectors on the back are wired to nothing.

Notice the three connectors on the back are wired to nothing.

more…

Kenwood D710A VHF-UHF Dual Bander !!SOLD!!

!!SOLD!!

I'm selling my Kenwood D710A VHF-UHF Dual Bander because I want to get a Elecraft KX3. If you're interested its for sale on Ebay.

This is the rig I used to track our RV trip a few summers ago. Great Radio!

more…

Open-TX on the Turnigy 9XR

I'm going to completely skip setting up the 9xr with the stock firmware and jump ahead to getting Open-TX onto the  9XR and setting that up for the Nano QX.

Why Open-TX?

Open-TX is an open source firmware that has more features and is more configurable than the stock firmware …

more…