Icom M710 Digital 101–Step Two HRD DM780

In my last post, I covered getting Ham Radio Integrator setup with the Icom M710 and you should now be able to control your rig from the PC. This next post is going to cover setting up the software to listen and send digital modes like PSK, RTTY, Olivia, etc …

more…

Icom M710 Digital 101–Step One HRI

OK, we’ve made our Icom M710 control cable that also can TX audio. Now we’re ready to use some software to send and receive digital HAM signals. We’re going to start with PSK31 because that’s what I did today so it’s the one I know …

more…

The complete Cable for Digital Modes with the Icom M710

In my last post I outlined the wiring for achieving rig control with the ICOM M710RT (RT is my model) using the Icom Control Panel Application and Ham Radio Integrator from N3ZH. That is nice, in that you can tune the radio with your PC, but you need Audio out …

more…

Conclusion – DIY Icom M710 Remote Control Cable

This post is a final version of the Help Wanted post of the same title. I will outline how to build and connect the M710 Remote Cable.

The Icom M710 Marine SSB and HAM Radio has a DB9 port on the backside of the main body (for those with the …

more…

Help Needed - Icom M710 Remote Control Cable

The Icom M710 Marine SSB and HAM Radio has a DB9 port on it that is technically called a NMEA port. Via a custom cable you can connect it to a standard PC Serial port and control the radio with software programs. I have been trying to make this cable …

more…